Apple Cider Milkshake

A great tasting milkshake and another great way to enjoy the taste of apples

By MaryBeth at Dunkin Cooking the Semi-Homemade Way

MaryBeth says this about her drink creation: “I highly recommend giving [this milkshake] a try. It is a great tasting shake and another great way to enjoy the taste of apples.”

What goes in it:

• 6 scoops vanilla ice cream
• 1¼ cups apple juice
• ½ tablespoon ground cinnamon

Place all ingredients into a blender.

Blend on high speed for approximately one minute.

Serve in a glass of your choice.

This recipe yields two wine goblets full of shakes.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this delicious non-alcoholic milkshake independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Tips for Blender Safety

Before using your blender, it’s always helpful to review “the basics”:

1. Make sure the electrical cord is not frayed or split.
2. Set the blender control to "off" before plugging it in.
3. Position the blender so that the cord can reach the electrical outlet without stretching.
4. Make sure your hands are dry before plugging it in.

Here are some hints and adaptations to help with plugging in the blender:

This shows you how to mark your wall outlet

1. To locate the blender plug, it’s helpful to first find the spot where the cord attaches to the blender and then use your fingers to “trail” or follow along the cord until you reach the plug.
2. You can mark the electrical outlet with raised or color-contrasting dots to help with fitting the prongs of the plug into the outlet.
3. You can also create your own raised dots by using small pieces of tape or dots of glue.
4. Use a power strip or surge protector. Plug it into the outlet and plug the blender into the power strip. Mark the outlets on the power strip with raised or color-contrasting dots.

You can learn additional home and kitchen safety tips and techniques at Home and Kitchen Safety.

See Find Labeling Products and Labeling and Marking for more information about marking and labeling other types of household items.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Applejack Rabbit-tini

This is a classic Gourmet cocktail from December 1965 and the epitome of Fall refreshment

By Ashley Rodriguez at Not Without Salt

Ashley notes the following: “This is a classic Gourmet cocktail from December 1965 … and the epitome of Fall refreshment. Perfectly balanced, crisp, refreshing, and comforting as a mug of hot cider but more fun.”

What goes in it:

• 2 ounces apple brandy
• Juice of ½ lemon
• 1 tablespoon maple syrup
• Apple slices for garnish (optional)

Fill a cocktail shaker halfway with cracked ice. Pour in the apple brandy, lemon juice, and maple syrup. Shake the mixture vigorously and strain it into a chilled martini glass. Garnish with an apple slice.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this refreshing retro cocktail independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Hints for Slicing Garnishes

Use a cutting board with a non-slip bottom. You can also place a flat, rubberized mat (such as a silicone baking sheet or jar opener) under your regular cutting board for additional traction and stability.

Store your knives in a knife holder or with the blades covered if you store them in a drawer – and remember that a sharp knife is safer than a dull one. You can learn more home and kitchen safety tips and techniques at Home and Kitchen Safety.

It's possible to identify the sharp or slicing edge of the knife blade without touching it by using the following method:

Since the slicing (and sharper) edge is usually curved, try rocking the knife blade forward and backward on the cutting board to determine the slicing edge:

The knife blade will rock when the cutting edge is facing downward.

If you place the straight (and duller) edge against the cutting board, the knife will be flush against the cutting board and will not rock:

The knife blade will not rock when the straight non-cutting edge is flush against the cutting board.

If you have low vision, a reversible black-and-white cutting board can provide contrast when slicing. Lemons and oranges will show up more clearly on the black side, while the white side will provide better contrast with red and green fruits and vegetables.

A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.
A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Bloody Mary

There are many versions of the classic Bloody Mary. This recipe uses fresh horseradish and lemon for an extra kick.

What goes in it:

• 1 cup canned crushed tomatoes with juice
• 3 tablespoons thinly sliced red onion
• 2 cloves garlic, thinly sliced
• 3 tablespoons Worcestershire sauce
• 2 tablespoons white vinegar
• 2 tablespoons hot sauce
• 1 tablespoon prepared horseradish
• 1 tablespoon thinly sliced pimento
• 1 teaspoon sugar
• A pinch of red pepper flakes
• Kosher salt and freshly ground black pepper
• 3 cups tomato juice
• ¼ cup (6 ounces) vodka
• Juice of 1/3 lemon
• Freshly grated horseradish for garnish
• 6 lemon slices for garnish
• 6 celery stalks for garnish

Combine the canned tomatoes and their juice, onion, garlic, Worcestershire sauce, vinegar, hot sauce, prepared horseradish, pimento, sugar, and pepper flakes in a blender or food processor fitted with a steel blade. Season with salt and pepper. Blend or process until smooth. Pour into a large pitcher.

Add the tomato juice, vodka, and lemon juice. Stir well.

Pour over ice into large glasses and garnish with the fresh horseradish, lemon slices, and celery.

Makes 6 servings.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this spicy, festive cocktail independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Hints for Slicing Garnishes

Use a cutting board with a non-slip bottom. You can also place a flat, rubberized mat (such as a silicone baking sheet or jar opener) under your regular cutting board for additional traction and stability.

Store your knives in a knife holder or with the blades covered if you store them in a drawer – and remember that a sharp knife is safer than a dull one. You can learn more home and kitchen safety tips and techniques at Home and Kitchen Safety.

It's possible to identify the sharp or slicing edge of the knife blade without touching it by using the following method:

Since the slicing (and sharper) edge is usually curved, try rocking the knife blade forward and backward on the cutting board to determine the slicing edge:

The knife blade will rock when the cutting edge is facing downward.

If you place the straight (and duller) edge against the cutting board, the knife will be flush against the cutting board and will not rock:

The knife blade will not rock when the straight non-cutting edge is flush against the cutting board.

If you have low vision, a reversible black-and-white cutting board can provide contrast when slicing. Lemons and oranges will show up more clearly on the black side, while the white side will provide better contrast with red and green fruits and vegetables.

A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.
A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Tips for Blender Safety

Before using your blender, it’s always helpful to review “the basics”:

1. Make sure the electrical cord is not frayed or split.
2. Set the blender control to "off" before plugging it in.
3. Position the blender so that the cord can reach the electrical outlet without stretching.
4. Make sure your hands are dry before plugging it in.

Here are some hints and adaptations to help with plugging in the blender:

This shows you how to mark your wall outlet

1. To locate the blender plug, it’s helpful to first find the spot where the cord attaches to the blender and then use your fingers to “trail” or follow along the cord until you reach the plug.
2. You can mark the electrical outlet with raised or color-contrasting dots to help with fitting the prongs of the plug into the outlet.
3. You can also create your own raised dots by using small pieces of tape or dots of glue.
4. Use a power strip or surge protector. Plug it into the outlet and plug the blender into the power strip. Mark the outlets on the power strip with raised or color-contrasting dots.

You can learn additional home and kitchen safety tips and techniques at Home and Kitchen Safety.

See Find Labeling Products and Labeling and Marking for more information about marking and labeling other types of household items.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Cosmopolitans for a Crowd

The Cosmopolitan was the favorite drink of Sex and the City’s Carrie Bradshaw.

What goes in it:

• 4 cups limeade, made from frozen concentrate
• 2 cups (16 ounces) vodka
• 1 cup cranberry juice
• ½ cup (4 ounces) orange-flavored liqueur
• Lime slices, for garnish

Combine the limeade, vodka, cranberry juice, and orange liqueur in a tall pitcher; stir well. Refrigerate until well chilled. Before serving, stir again. Pour into martini glasses and garnish with lime slices.

Here are some practical, easy-to-implement adaptations that will enable you to prepare a batch of Cosmos independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Tips for Blender Safety

Before using your blender, it’s always helpful to review “the basics”:

1. Make sure the electrical cord is not frayed or split.
2. Set the blender control to "off" before plugging it in.
3. Position the blender so that the cord can reach the electrical outlet without stretching.
4. Make sure your hands are dry before plugging it in.

Here are some hints and adaptations to help with plugging in the blender:

This shows you how to mark your wall outlet

1. To locate the blender plug, it’s helpful to first find the spot where the cord attaches to the blender and then use your fingers to “trail” or follow along the cord until you reach the plug.
2. You can mark the electrical outlet with raised or color-contrasting dots to help with fitting the prongs of the plug into the outlet.
3. You can also create your own raised dots by using small pieces of tape or dots of glue.
4. Use a power strip or surge protector. Plug it into the outlet and plug the blender into the power strip. Mark the outlets on the power strip with raised or color-contrasting dots.

You can learn additional home and kitchen safety tips and techniques at Home and Kitchen Safety.

See Find Labeling Products and Labeling and Marking for more information about marking and labeling other types of household items.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Hints for Slicing Garnishes

Use a cutting board with a non-slip bottom. You can also place a flat, rubberized mat (such as a silicone baking sheet or jar opener) under your regular cutting board for additional traction and stability.

Store your knives in a knife holder or with the blades covered if you store them in a drawer – and remember that a sharp knife is safer than a dull one. You can learn more home and kitchen safety tips and techniques at Home and Kitchen Safety.

It's possible to identify the sharp or slicing edge of the knife blade without touching it by using the following method:

Since the slicing (and sharper) edge is usually curved, try rocking the knife blade forward and backward on the cutting board to determine the slicing edge:

The knife blade will rock when the cutting edge is facing downward.

If you place the straight (and duller) edge against the cutting board, the knife will be flush against the cutting board and will not rock:

The knife blade will not rock when the straight non-cutting edge is flush against the cutting board.

If you have low vision, a reversible black-and-white cutting board can provide contrast when slicing. Lemons and oranges will show up more clearly on the black side, while the white side will provide better contrast with red and green fruits and vegetables.

A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.
A reversible cutting board can offer good color contrast with a wide range of fruits and vegetables.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Lily Blossom

By Matt Robold at Rumdood

According to Matt, “This drink was developed by Matt Wallace at Seven Grand, my favorite whiskey bar in Los Angeles. (Yes, a rum drink developed in a whiskey bar — you can’t escape rum).”

What goes in it:

• 2 ounces white rum
• ¾ ounce honey syrup
• 1 ounce Lillet Blanc
• ¾ ounce lime juice
• 2 drops orange flower water
• 2 sprigs mint

Muddle 1 sprig of mint with syrup and rum in a cocktail shaker.

Add the remaining ingredients and shake vigorously with ice.

Strain over ice into a double old-fashioned glass.

Garnish with the remaining mint sprig.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this refreshing rum cocktail independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Pecan Milk

By Alejandra Ramos at Always Order Dessert

Alejandra says this about her drink creation: “Pecan Milk … is a dairy-free ‘milk’ similar to almond or rice milk, but better. Better because it's lusciously creamy and tastes kind of like an amazing nutty milkshake, except that it's actually healthy. According to ILovePecans.org … pecans contain more than 19 vitamins and minerals -- including vitamin A, vitamin E, folic acid, calcium, magnesium, phosphorus, potassium, several B vitamins and zinc.”

What goes in it:

• 1¼ cups raw or roasted pecans (unsalted)
• 4 cups filtered or spring water
• ¼ cup raw honey (can substitute maple syrup or agave)
• 1/3 cup coconut milk
• 1 teaspoon ground cinnamon
• ¼ teaspoon nutmeg
• ½ teaspoon Celtic sea salt (or Kosher salt)
• Additional honey or sugar for sweetening

Combine the pecans, salt, and water in an airtight container. Seal and leave to soak in the refrigerator for at least 8 hours or overnight.

Pour the soaked pecans and the water mixture into a blender (note that the water will have turned slightly golden from the nuts).

Add the honey, coconut milk, cinnamon, and nutmeg.

Process on high for two minutes or until the mixture is smooth.

Sweeten to taste and store in the refrigerator. This will last one week refrigerated in an airtight container.

Note: For a smoother beverage, strain the pecan milk through a sieve lined with cheesecloth.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this delicious non-alcoholic drink independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Tips for Blender Safety

Before using your blender, it’s always helpful to review “the basics”:

1. Make sure the electrical cord is not frayed or split.
2. Set the blender control to "off" before plugging it in.
3. Position the blender so that the cord can reach the electrical outlet without stretching.
4. Make sure your hands are dry before plugging it in.

Here are some hints and adaptations to help with plugging in the blender:

This shows you how to mark your wall outlet

1. To locate the blender plug, it’s helpful to first find the spot where the cord attaches to the blender and then use your fingers to “trail” or follow along the cord until you reach the plug.
2. You can mark the electrical outlet with raised or color-contrasting dots to help with fitting the prongs of the plug into the outlet.
3. You can also create your own raised dots by using small pieces of tape or dots of glue.
4. Use a power strip or surge protector. Plug it into the outlet and plug the blender into the power strip. Mark the outlets on the power strip with raised or color-contrasting dots.

You can learn additional home and kitchen safety tips and techniques at Home and Kitchen Safety.

See Find Labeling Products and Labeling and Marking for more information about marking and labeling other types of household items.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Pumpkin Pie Milkshake

By Kevin at Closet Cooking

According to Kevin, “This drink is pretty much a pumpkin pie in milkshake form … You can easily control the consistency of the shake by changing the amount of milk you use. If you like a thick shake, use just enough milk so that the ice cream or frozen yogurt will puree in the bender. If you like a thinner shake, add additional milk.”

What goes in it:

• 2 cups vanilla frozen yogurt
• 1/4 cup milk
• 1/3 cup canned pumpkin puree
• 1/4 teaspoon vanilla
• 1/2 teaspoon cinnamon
• 1/4 teaspoon ginger
• 1/8 teaspoon cloves
• 1/8 teaspoon nutmeg
• 2 tablespoons brown sugar
• 2 tablespoon ginger snap cookies (crumbled, optional)

Place all ingredients in a blender. Blend on high speed for approximately one minute. Serve in a glass of your choice. Garnish with the crumbled gingersnap cookies. Here are some practical, easy-to-implement adaptations that will enable you to prepare this delicious non-alcoholic milkshake independently if you’re blind, visually impaired, or have low vision.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this delicious non-alcoholic milkshake independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Tips for Blender Safety

Before using your blender, it’s always helpful to review “the basics”:

1. Make sure the electrical cord is not frayed or split.
2. Set the blender control to "off" before plugging it in.
3. Position the blender so that the cord can reach the electrical outlet without stretching.
4. Make sure your hands are dry before plugging it in.

Here are some hints and adaptations to help with plugging in the blender:

This shows you how to mark your wall outlet

1. To locate the blender plug, it’s helpful to first find the spot where the cord attaches to the blender and then use your fingers to “trail” or follow along the cord until you reach the plug.
2. You can mark the electrical outlet with raised or color-contrasting dots to help with fitting the prongs of the plug into the outlet.
3. You can also create your own raised dots by using small pieces of tape or dots of glue.
4. Use a power strip or surge protector. Plug it into the outlet and plug the blender into the power strip. Mark the outlets on the power strip with raised or color-contrasting dots.

You can learn additional home and kitchen safety tips and techniques at Home and Kitchen Safety.

See Find Labeling Products and Labeling and Marking for more information about marking and labeling other types of household items.

You can find electronic liquid level indicators in the VisionAware Online Store and Sources of Products for Independent Living.

Raspberry Champagne Cocktails The Food Channel

Fresh raspberries soaked in crème de cassis and then bathed in chilled Champagne, with just a hint of grenadine for extra flavor, make this a sophisticated and eye-catching way to start the evening.

What goes in it:

• ½ cup fresh raspberries
• 3 tablespoons crème de cassis
• 1 bottle dry Champagne or sparkling wine, chilled
• 4 to 6 teaspoons grenadine syrup (optional)

Place the raspberries in a small bowl, add the crème de cassis, and let soak for at least 30 minutes.

Divide the raspberries among six Champagne flutes and pour in the chilled Champagne. Add grenadine to taste and serve immediately.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this attractive, feestive cocktail independently if you’re blind, visually impaired, or have low vision.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this attractive, festive cocktail independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.

Satan’s Whiskers

By Marleigh Riggins Miller at Sloshed

According to Marleigh, “This is probably one of the best cocktail names ever put to paper. There’s just a little twinge of the Inferno in there … what better drink to get everyone in the [holiday] mood?”

What goes in it:

• ½ oz gin
• ½ oz sweet vermouth
• ½ oz dry vermouth
• ½ oz fresh orange juice
• 2 tsp orange curaçao or Grand Marnier
• 1 tsp orange bitters

Shake well with ice and strain into an iced cocktail glass. Garnish with an orange twist.

Here are some practical, easy-to-implement adaptations that will enable you to prepare this “devilish” cocktail independently if you’re blind, visually impaired, or have low vision:

Use a Tray

Organize your drink ingredients ahead of time on a cookie sheet or tray with a raised edge or lip. This can contain any spills and also help with cleanup afterward. If you have low vision, you can provide extra contrast by covering the tray surface with a contrasting paper towel or washable placement.

A cookie sheet covered with a white paper towel provides contrast with the darker liquor bottles.
A cookie sheet covered with a dark blue placemat provides contrast with a clear glass.

Check the Lighting

If you have low vision, make sure the lighting in your work area provides sufficient illumination. A flexible-arm task lamp enables you to focus light directly on your work area. You can learn more about lighting at Home Modifications.

Measuring Ingredients

Use a long-handled measuring spoon placed over a larger flat-bottomed measuring cup. If the spoon overflows, the excess liquid will spill into the cup and can be returned to the bottle or container with a funnel.

Use a white measuring spoon for darker liquids and place it over a dark measuring cup for better contrast.
Use a dark measuring spoon for white liquids and place it over a white measuring cup for better contrast.
Place your jigger or shot glass inside a larger flat-bottomed measuring cup.
Place your measuring cup inside a larger contrasting bowl.

Place your index finger at the rim of the glass to prevent overflow.

Tips for Pouring

Place your index finger at the rim of the glass to feel the liquid rising to the top. (Please note: This technique is effective with cold liquids only.)

To avoid spills, don’t hold the glass in the air as you pour; instead, place it on a level surface, such as the tray at your work area.

Electronic liquid level indicators will beep, buzz, vibrate, or play music to indicate when the rising liquid is close to the top rim of the glass. You can learn more about pouring at Hints for Easier Eating and Pouring.

Use an electronic liquid level indicator on the rim of your glass to help prevent overflow.
You can even use an electronic liquid level indicator with your champagne glass.